Everything A Programmer Needs To Know About Car Keys
In 1995, Siemens first developed the smart key and named it “smart key”. “Pass without key”, you can put the key in your pocket and still unlock, lock and start the car. It enhances the convenience and safety of vehicles.
They are also called chip keys and relay keys. These keys need to be programmed with a specific vehicle before use. Keys can only be handled on specific vehicles.
Programming car keys may seem tricky at first glance, but it’s worth it.
This document describes some of the methods you can learn and introduces the best programmers in the market.
We will discuss three ways. let me have a look.
Key programming
Please get on the bus and sit in the driver’s seat first. Because to connect the key to the vehicle, you must be close to the ignition switch of the vehicle. If the key is programmed, it is required when processing the new key.
The manufacturer provides step-by-step instructions. Vehicles with improved answering machines on the keys may require professional assistance.
After entering, insert the programmed key into the ignition switch and put it there temporarily. Keep the other key handy.
Turn on the key from the ignition switch to activate the electrical system without starting the motor. Then return the key to me. Repeat this procedure if there are other programmed keys. The switching time between these keys is 5 seconds.
Finally, remove the key to be programmed, repeat the same steps, and then place it there. The security indicator illuminates for a period of time and flashes for a few seconds. Then take out the programming key and test whether it works.
Method of programming remote control keys
Remove the ignition key and remote control key. Put the key in the ignition switch and the engine will start without moving. Lock all the doors.
Hold the remote control and aim at the receiver. Turn the key for a few seconds and press the lock button. Then immediately turn off the car and insert the key into the ignition switch. Because there is a few seconds before the car system reset command.
When working with a new remote control, the previously programmed remote control may not work. Therefore, the above steps must be repeated without waiting for all remote control buttons. After waiting for more than a few seconds, the car can exit the programming mode.
Repeat this step finally after you finish all the remote control buttons. Without starting, turn the key on the ignition switch to start the car. Then press the lock button of the first remote control key.
Then click the lock button on all other remote controls. A voice is sent from the lock to confirm the successful programming of the remote control. Repeat this step for each remote control instead of waiting between steps. Finally, turn off the ignition switch and test all remote controls.
To replace a key:
You can purchase an empty key that is specifically made for the brand and model of the car online. But confirm whether the key is empty. If the car is new, professional help from the dealer or locksmith is required. When you give them your VIN, they will help you. Please take away the code card from the owner’s manual. This makes the process easier.
Before purchasing a car key programmer, make sure that the device is compatible with the car model and that the programmer is up to date. We have reviewed the top three available in the market. let me have a look.
- XTOOL X100 PAD automatic key programmer
Multi purpose programmer. In addition to key programming, it also has other functions such as distance adjustment, oil maintenance reset, timing belt maintenance reset, tire pressure warning reset, EPB reset, throttle body reset, battery reset, angle correction and OBD II engine diagnosis.
As a car key programmer, you can program and read the key and PIN code. You can also program vehicle identification numbers, remote programming, and update the database with vehicle details.
The tool can update itself regularly through Wi Fi and supports multiple languages.
- SODIAL(R) 2014CK-100 Automatic Key Programmer
The car key programming program is very useful for safety management, monitoring and management of vehicle performance. It is light and easy to use.
Manage and update vehicle information, and provide support systems for mechanical parts such as spark plugs, brake pads, coolant, engine oil, brake fluid, vehicle exhaust system, and tire pressure. If a problem occurs, the programmer will immediately issue a warning.
- XtremeAmazing CK-100 car key programmer
This is a light and small car key, and the price is moderate. This is ideal if you are looking for easy-to-use tools.
Weighs 2.2 pounds and measures 11.6 x 8.8 x 3.2 inches. Easy to use, easy to install. The new generation SBB Key Programmer that supports multiple languages.
The above tools contain instructions on how to use them.
However, if the programmer is unable to work, seek help from the automatic lock or an expert.