Useful Tips For Installing And Removing Car Batteries
High quality and innovative electronic components are installed in modern and medium-sized cars.
The circuit connected to the on-board computer is connected to the ABS braking system, airbag control and road safety control system.
This requires different battery installation and removal methods depending on the vehicle.
It is important to follow the manufacturer’s recommendations in order to avoid risks and negative consequences. If possible, it is best for vehicle maintenance personnel to implement these procedures. However, it is best to understand the main topics of this topic.
• Directly check whether the battery type and battery capacity are consistent with those specified by the manufacturer on your vehicle.
• When installing the starter battery, make sure it is in good operation and charged.
• Do not replace the battery before confirming that the engine and all electrical equipment in the vehicle have stopped.
• The first step is to always separate the positive terminal and then the negative terminal.
• It is recommended to clean the wall material of the battery case before installing a new battery. Insert accurately and slowly to ensure it is in place and firmly fixed there without shaking. Otherwise, the battery may be exposed to the friction of the panel cabinet, thus shortening the battery life.
• Clean the anode, negative terminal and electrode. The ends are coated with a thin layer of non acid grease to prevent oxidation.
• Dirt on the battery case may be conductive. The greater the pollution, the greater the potential leakage. Therefore, there is a danger of the battery running out, so always clean the battery pack correctly.
• When installing a new battery, you must first connect the positive terminal and then the negative terminal. This is good. They are close and firm. When you start your car, you need a few amperes of current, which is very important for them to have a solid connection between the terminal of the device and the battery electrode. If the terminal is damaged or defective, it is recommended to replace the reliable terminal to ensure road safety.